Supplier:

Article no:

Designation:

Supplier no.:

Change index:

Date:

Feasibility Study for Production under Series Conditions

If no data is available from series production for the current planning status, use empirical data from similar processes/components. If further data is required, complete a supplement!

YES	NO	N/A
Can all requirements be met and is the necessary test equipment available (e.g., drawing, requirements specification, standards, specifications)? If no, please justify:	(1)
Is the drawing information clear and complete? If no, please justify:	(1)
Are special features that are defined on the drawing checked during the process and the results recorded? If no, please justify:	(1)
Are all process steps executed internally? If no, which steps are outsourced?	(2)
Can you provide JULABO test reports? If yes, which ones?	(2)
Can be excluded that the product contains substances, whose use is restricted by RoHS II Directive (2011/65/EU), REACH (1907/2006/EC) or POP (850/2004/EC)? More detailed information can be found under the following links: Link Appendix II of the RoHS Directive with restricted substances Link REACH Candidate list of substances of very high concern (SVHCs) Link List of persistent organic pollutants (POPs)	(2)
Were steps taken to ensure due diligence with respect to conflict minerals (tin, tantalum, gold, tungsten) in the supply chain, provided that the product can contain conflict minerals from regions of conflict and/or risk, such as the Democratic Republic of Kongo or neighboring states? If yes, which ones?	(2)

If one of the questions was answered with NO, this must be aligned by the JULABO buyer with the respective persons responsible from the Development(1) or Quality Management(2)areas.

Producible	The product can be developed and produced as described and with the planned

costs without change.

Conditionally producible	The product can be developed and offered with the described

restrictions/changes

Not producible	Design changes required to develop and produce the product according to the

requirements

Product Optimization

Do features, materials, or processes exist, where a simplification/change would lead to a cost reduction, quality improvement, and/or to a reduction of the hazardous substance content in relation to the REACH/RoHS/POP and CM Directives? If yes, which ones?

_____________________________________________________________________________________

Date	I Person responsible: Name, first name, department, extension, e-mail	I Signature